Placing Originals; Acceptable Originals; Forgery Prevention Function - Toshiba E-studio 207L Operation Manual

2 HOW TO MAKE COPIES

Placing Originals

 Acceptable originals
When the RADF (Reversing Automatic Document Feeder, optional) is used, 2-sided originals can be
automatically scanned one sheet after another. When the original glass is used, originals such as OHP films,
tracing paper, booklet or 3-dimensional objects, that cannot be placed on the RADF can be scanned, as well
as plain paper.
Location
Original glass
RADF (optional)
 Automatic size detection does not work properly when A/B format originals are used in equipment for
North America. It does not work properly when LT format originals are used in equipment other than
that for North America.
 Automatic size detection does not work properly when K format paper is used for printing. (K format is a
standard paper size in China.)
 Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
 Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF (optional).
 A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes
full.
 Forgery prevention function
This equipment has a forgery prevention function. Therefore, scan or copy function might not operate
correctly.
22

Placing Originals

Maximum size
Length: 297 mm
(11.69")
Width: 432 mm
1-sided originals: 35 -
(17.01")
157 g/m
2-sided originals: 50 -
157 g/m
Acceptable sizes for
Paper weight
automatic size detection
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
— B5-R
North America: LD, LG, LT,
LT-R, ST-R
Other than North America:
A3, A4, A4-R, A5-R, B4, B5,
2
(9.3 - 41.8 lb.)
B5-R, FOLIO
North America: LD, LG, LT,
2
(13.3 - 41.8 lb.)
LT-R, ST-R, COMP