Toshiba E-studio 207L Operation Manual page 100

4 EDITING FUNCTIONS
Adjust the width of the part to be erased.
4
1) Press either [
2) Press [OK].
5 Place the original on the original glass.
Place the original with its bottom toward you, aligning its center
with the yellow indicator under the original glass.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on
it with force.
Breaking the glass could injure you.
Select other copy modes as required, and then press the [START] button on the control
6
panel.
98 Book Center Erase
2 mm] (0.08") or [ 50 mm] (1.97").