Toshiba E-studio 207L Operation Manual page 108

4 EDITING FUNCTIONS
Select [TRIM] or [MASK].
3
Place the original on the original glass with its face
4
up.
Place it with its bottom toward you. Align its top left corner
against that of the original glass so that the original will be
aligned with the original scales.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on
it with force.
Breaking the glass could injure you.
Read the following 4 values to specify the area using
5
the left and top scales on the original glass.
X1: From the top left to the left edge of the selected area
X2: From the top left to the right edge of the selected area
Y1: From the top left to the upper edge of the selected area
Y2: From the top left to the lower edge of the selected area
Note that the marks of the original scales have a 2 mm (0.08")
pitch.
106 Image Editing