Toshiba E-studio 207L Operation Manual page 14

1 BEFORE USING EQUIPMENT
*1 Duplex copying is not available.
*2 When the Saddle Stitch Finisher MJ-1108 (optional) is installed, the paper exits on the upper tray.
*3 For making copies on the tracing paper, select "PLAIN" for the paper type.
*4 For making copies on the sticker labels, select "THICK 2" for the paper type. Only Toshiba-recommended sticker labels should be
used.
*5 Copying on the back side of an envelope is not possible.
*6 When the Finisher MJ-1107 (optional) or the Saddle Stitch Finisher MJ-1108/MJ-1033 (optional) is installed, the envelope exits to the
exit tray of the equipment. When the Inner Finisher MJ-1032N (optional) is installed, the envelope exits to the receiving tray of the
finisher.
 "LT format" is the standard size only for use in North America.
 "K format" is a Chinese standard size.
 Abbreviations for paper sizes: LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer, SQ:
Square
 Unacceptable copy paper
Do not use the types of paper shown below. This could cause a paper misfeed.
 Damp paper
 Folded paper
 Curled or creased paper
 Paper whose surface is extremely smooth or rough
Do not use the types of paper shown below. This could cause an equipment malfunction.
 Paper whose surface has had special treatment
 Paper once printed with other copiers or printers
 Sticker labels shown below
- The released paper is visible since its label has been punched out
- The released paper is visible since a part of its label has peeled off
- A sticker label which has been cut
 Precautions for storing copy paper
Make sure of the following when storing copy paper:
 Wrap the paper in its wrapping to keep it free from dust.
 Avoid direct sunlight.
 Store in a damp-free space.
 To prevent paper from being folded or bent, store it in a flat place.
12 Placing Paper