Time Stamp
You can add the date and time on the copied paper.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press [TIME STAMP] on the EDIT menu.
4
Select the direction and position of the time stamp.
1) Select the direction ([SHORT EDGE] or [LONG EDGE]).
2) Select the position ([UPPER] or [LOWER]).
3) Press [OK].
Select other copy modes as required, and then press the [START] button on the control
5
panel.
Printed at the bottom
of a portrait copy
MM.DD.YYYY 14:54
Printed at the top
of a landscape copy
MM.DD.YYYY 14:54
4 EDITING FUNCTIONS
Time Stamp
115