Pull the bulb out of the bulb
socket.
Replace the defective bulb.
Bulb for number-plate
light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Insert the bulb into the bulb
socket.
Insert bulb socket 1 into the
bulb housing.
http://www.motorcycle.in.th
Jump starting
The wires leading to the
charging socket do not
have a load-capacity rating ad-
equate for jump-starting the en-
gine of the Scooter. Excessively
high current can lead to a cable
fire or damage to the vehicle
electronics.
Do not use the charging socket
to jump-start the engine of the
Scooter.
A short-circuit can res-
ult if the crocodile clips
of the jump leads are accident-
ally brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the vehicle
electronics.
Make sure that the battery of the
8
99
z