BMW C 650 GT Rider's Manual page 52

4
50
Push the ignition key down and
turn it clockwise.
z
If the action is stiff press down
on the seat at the rear and
then lift it slightly at the rear.
To close, press the rear of the
seat down until it latches shut.
Adjusting pelvic support
Open the seat.
Slacken screw 1 ten full turns.
Slacken screw 2 ten full turns.
Slacken screw 3 ten full turns.
Repeat this sequence until the
pelvic support can be removed.
Do not remove the screws
from the seat.
http://www.motorcycle.in.th
Align mounts 4 in the pelvic
support in the desired position
above the screws in the seat.
Tighten screw 1 five full turns.
Tighten screw 2 five full turns.
Tighten screw 3 five full turns.