BMW C 650 GT Rider's Manual page 91

Install the front-wheel stand
( 93).
Slacken right axle clamping
screws 1.
Remove quick-release axle 2,
while supporting the wheel.
Roll the front wheel forward to
remove.
Install the front wheel
Malfunctions are possible
when the ABS system in-
tervenes if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS system
at the start of this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
http://www.motorcycle.in.th
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in axle
holder
30 Nm
Tighten axle clamping screws 1
to the specified tightening
torque.
8
89
z