BMW C 650 GT Rider's Manual page 84

8
82
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: from the
bottom right toward brake
z
pads 1.
Brake-pad wear limit,
rear
min 1.0 mm (Friction pad
only, without backing plate.)
If the wear indicating marks are
no longer visible:
Brake pads worn past the
minimum permissible thick-
ness can cause a reduction in
braking efficiency and under
certain circumstances they can
cause damage to the brake sys-
tem.
In order to ensure the dependab-
http://www.motorcycle.in.th
ility of the brake system, do not
permit the brake pads to wear
past the minimum permissible
thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Checking brake-pad
thickness, parking brake
Make sure the ground is level
and firm and place the Scooter
on its stand.
Visually inspect the brake pads
to ascertain their thickness.