Fuses; Bulbs - BMW C 650 GT Rider's Manual

Fuses

Removing fuse
Any attempt to jumper a
defective fuse gives rise to
the risk of a short-circuit and fire.
Always replace a defective fuse
with a new fuse of the same
amperage.
Switch off the ignition.
Remove the right side panel.
Using the tool from the on-
board toolkit, remove the de-
fective fuse from fuse box 1 or
from fuse carrier 2, as applic-
able.
To open the fuse box, squeeze
latches 3 together and remove
the fuse cover.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Installing fuse
Replace the defective fuse with
a fuse of the correct amperage
rating.
http://www.motorcycle.in.th
The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data". The figures in the
graphic correspond to the fuse
numbers.
Close the fuse cover.
The latch engages with an
audible click.
Install the side panel (

Bulbs

Replacing low-beam and
high-beam headlight bulb
Make sure the ground is level
and firm and place the Scooter
on its stand.
Switch off the ignition.
Remove the right side panel
so that the low-beam headlight
bulb can be replaced.
8
95
103).
z