BMW C 650 GT Rider's Manual page 90

Removing front wheel
8
88
Remove screws 1 and 2 on left
and right and work the front-
wheel cover forward to remove.
z
Remove screw 1 and remove
the ABS sensor from its bore.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 2 of the brake
calipers on left and right.
http://www.motorcycle.in.th
Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Make sure the ground is level
and firm and place the Scooter
on its centre stand.
Raise the front of the Scooter
until the front wheel can turn
freely. BMW Motorrad recom-
mends the BMW Motorrad
front-wheel stand for lifting the
Scooter.