Date And Time - BMW C 650 GT Rider's Manual

Date and time

Setting time
Switch off the engine and
switch on the ignition.
Repeatedly press button 1
(TRIP) until odometer reading 3
appears on the display.
Press and hold down button 1
(TRIP) until the first time
value 4 to be changed starts to
flash.
Set the flashing value by press-
ing buttons 1 (TRIP) and 2
(INFO).
Press and hold down button 1
(TRIP) until the next value
starts to flash.
Set the flashing value by press-
ing buttons 1 (TRIP) and 2
(INFO).
Press and hold down button 1
(TRIP) until the reading stops
flashing.
This completes the process.
You can exit the process at the
end of each step:
Without pressing any buttons,
wait until the reading stops
flashing.
The settings already made are
accepted.
Setting date and time
Switch off the engine and
switch on the ignition.
Date and time are set
one immediately after the
other.
http://www.motorcycle.in.th
Repeatedly press button 2
(INFO) until the date 3 appears
on the display.
The sequence in which
day, month and year are
shown can vary from country to
country.
Press and hold down button 2
(INFO) until the first date
value 3 to be changed starts to
flash.
Set the flashing values by
pressing buttons 1 (TRIP)
and 2 (INFO).
4
39
z