General Instructions; Power Sockets - BMW C 650 GT Rider's Manual

General instructions

7
BMW Motorrad recommends the
use of parts and accessories for
72
your vehicle that are approved by
BMW for this purpose.
Genuine BMW parts and ac-
cessories and other products
which BMW has approved can
be obtained from your authorised
BMW Motorrad dealer, together
with expert advice on their install-
ation and use.
These parts and products have
z
been tested by BMW for safety,
function and suitability. BMW
accepts product liability for them.
Conversely, BMW is unable to
accept any liability whatsoever
for parts and accessories which it
has not approved.
Also bear in mind the information
on the effect of wheel size on
the anti-lock brake system ABS
( 87).
BMW Motorrad cannot
examine or test each
product of outside origin to
ensure that it can be used on
or in connection with BMW
Scooters without constituting
a safety hazard. Country-
specific official authorisation
does not suffice as assurance.
Tests conducted by these
instances cannot make provision
for all operating conditions
experienced by BMW Scooters
and, consequently, they are not
sufficient in some circumstances.
Use only parts and accessor-
ies approved by BMW for your
Scooter.
Whenever you are planning
modifications, comply with all
the legal requirements. Make
sure that the vehicle does not
infringe the national road-vehicle
construction and use regulations
applicable in your country.
http://www.motorcycle.in.th

Power sockets

Notes on use of power sockets:
Operating electrical
accessories
Battery capacity is not monitored
while one or more sockets are
in use. Running add-on devices
for a lengthy period without the
engine running can completely
drain the battery. Under these
circumstances there is no guar-
antee that the Scooter will start.
Cable routing
The cables from the power sock-
ets to the auxiliary devices must
be routed in such a way that
they:
Do not impede the rider
Do not restrict the steering
angle or obstruct handling
Cannot be trapped