Preparing Originals - Samsung MultiXpress X422x Series Administrator's Manual

Loading originals
3 Close the DSDF.
• Leaving the DADF open while copying may affect copy quality and toner
consumption.
• Dust on the scanner glass may cause black spots on the printout. Always
keep it clean.
• If you are copying a page from a book or magazine, lift the DSDF until its
hinges are caught by the stopper and then close the lid. If the book or
magazine is thicker than 30 mm (1 inch), start copying with the lid open.
• Be careful not to break the scanner glass. You may get hurt.
• Do not put hands on the scanner glass while closing the DSDF. The DSDF
may fall on your hands and cause injury.
• Do not look at the light inside of the scanner while copying or scanning.
It is harmful to eyes.
2
In the dual scan document feeder (DSDF)

Preparing originals

• Do not load paper smaller than 140 x 140 mm (5.5 x 5.5 inches) or larger than
297 x 432 mm (11.7 x 17 inches).
• The DSDF can automatically detect A3, A4 LEF, A4 SEF, B4, B5 LEF, B5 SEF, A5
LEF, A5 SEF, Ledger, Legal, Letter LEF, Letter SEF, Statement LEF, and
Statement SEF-sized originals.
• Do not attempt to load the following types of paper, in order to prevent
paper jams, low print quality, and machine damage.
- Carbon paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
• Do not load originals that include different sizes or weights of paper.
43
2. Media and tray