Samsung MultiXpress X422x Series Administrator's Manual page 217

Understanding display messages
Message
Shake [color] toner Small amount of toner
cartridge is left in the indicated
cartridge.
The clock became initial The time setting of
time. Set a time again machine is initialized.
The IPv4 address The IPv4 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wieless
other system. Check it LAN).
The IPv6 address The IPv6 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wieless
other system. Check it LAN).
The room temperature is The machine is in a
not suitable for this set room with improper
use. Please adjust room room temperature.
temperature
This IP address conflicts The IP address is used
with that of other system. elsewhere.
Check it
Toner Cartridge Failure: There is a problem in
[error number]. Call for the toner cartridge.
service
Meaning Suggested solutions
• You may temporarily
increase the printing
quality by
redistributing the toner
(see "Redistributing
toner" on page 184).
• If the problem persists,
call for service.
Set the time setting in
Machine Setup.
Check the IPv4 address or
obtain a new IP address.
Check the IPv6 address or
obtain a new IP address.
Please adjust room
temperature (see
"Adjustment" on page
287).
Check the IP address or
obtain a new IP address.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Message
Toner cartridge is not The imaging unit you
compatible. Check users have installed is not for
guide your machine.
TR Failure: [error The transfer roller is
number]. Install transfer not installed.
roller again
Tray failure [error The tray is not securely
number]. Check Tray connected.
connection
Tray failure [error The tray is not securely
number]. Pull [tray connected.
number] out and insert it.
Call for service if the
problem persists
[tray number] is not The tray is not properly
installed. Install the tray installed.
[tray number] cassette is The tray is not securely
pulled out. Insert it latched.
properly
[tray number] door is The tray door is not
open. Close it securely latched.
Meaning Suggested solutions
Install a Samsung-genuine
imaging unit, designed for
your machine (see
"Available Consumables"
on page 237).
Install the transfer roller. If
it is already installed, try to
reinstall the transfer roller.
If the problem persists, call
for service.
Reinstall the tray. If the
problem persists, call for
service.
Reinstall the tray. If the
problem persists, call for
service.
Reinstall the tray. If the
problem persists, call for
service.
Close the tray until it locks
into place.
Close the tray door until it
locks into place.
9. Troubleshooting
217