Samsung MultiXpress X422x Series Administrator's Manual page 139

Receiving a fax
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• Click the (Help) from the home screen or
then click on any option you want to know about.
• You can also use this feature from the
web browser from a networked computer and type the IP address of your
machine. When SyncThru™ Web Service opens, click Settings tab >
Machine Settings > Fax (see
Option
Machine ID & Fax No
Redial
Prefix Dial
(quick menu) and
SyncThru™ Web Service. Open a
"Settings tab" on page 161).
Description
You can set the machine ID and fax number to
be printed at the top of each page.
Set the machine to re-dial the fax number if
the recipient's fax line is busy or not answered.
Set the number of re-dial attempts and the
interval between attempts.
• Redial Term: Select terms for re-dialing
using the up/down arrows.
• Redial Times: Select a re-dial time using
the up/down arrows. Select 0 to disable
redialing.
Set the number to be dialed before the
destination number. Users may use this to
access a PABX (e.g. 9) or an area code (e.g. 02).
Once this number is set, it automatically
appears on the screen when entering a
phone/fax number.
Option
Dial Mode
ECM Mode
Modem Speed
Receive Mode
Ring to Answer
Toll Save
Description
Set the dialing mode to either tone or pulse.
This setting may not be available depending
on your country.
Set the machine to correct errors. This helps
overcome poor line quality and ensures any
faxes you send are properly transmitted to any
other error correction-equipped fax machine.
Sending a fax in this mode may take more
time.
Set the modem speed (4.8Kbps - 33.6Kbps).
Select the fax receiving mode.
• Telephone: Press On Hook Dial and then
Start to receive a fax.
• Fax: Receive incoming faxes normally and
immediately enter the fax reception mode.
• Answering Machine/Fax: Use when an
answering machine is attached to your
machine. Your machine answers the
incoming call, and the caller can leave a
message on the answering machine. If the
fax machine senses a fax tone on the line,
the machine automatically switches to Fax
mode to receive the fax.
Set the number of times the machine rings
before answering an incoming call.
Set the machine to send faxes in the toll save
time to reduce phone bill costs.
6. Scan & Send(Faxing)
139