Redistributing Toner - Samsung MultiXpress X422x Series Administrator's Manual

Redistributing toner

When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner low related message appears on the display.
• The status LED blinks orange.
If this happens, you can temporarily improve print quality by redistributing the
remaining toner in the cartridge. In some cases, white streaks or light printing
will still occur even after you have redistributed the toner.
Click this link to open an animation about redistributing toner.
1 Open the front door.
X422x Series/X425x Series/X430x Series K425x Series/K430x Series/K435x Series
Toner particles can be released inside the machine but it does not mean the
machine is damaged. Contact a service representative when print quality
problems occur.
2 Pull the corresponding toner cartridge out from the machine.
X422x Series/X425x Series/X430x Series
1
2
3 Thoroughly shake the cartridge five or six times to distribute the toner
evenly inside the cartridge.
X422x Series/X425x Series/X430x Series
K425x Series/K430x Series/K435x Series
1
2
K425x Series/K430x Series/K435x Series
9. Troubleshooting
184