Loading originals
You can use the scanner glass or the Dual scan document feeder (DSDF) to load
an original for copying, scanning, and sending a fax.
1
On the scanner glass
Make sure that no originals are in the DSDF. If an original is detected in the DSDF,
the machine gives it priority over the original on the scanner glass. To get the
best scan quality, especially for colored or gray-scaled images, use the scanner
glass.
Preparing originals
•
Do not load paper smaller than 25 x 25 mm (1.0 x 1.0 inch) or larger than 297
x 432 mm (11.7 x 17 inches).
•
Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
1
Open the DSDF.
2
Place the original face down on the scanner glass and align it with the
registration guide at the top left corner of the glass.
42
2. Media and tray