Media And Tray; Preparing Originals; Loading Originals; On The Scanner Glass - Samsung SCX-4623FN User Manual

Scx-4600 & scx-4623 series multi functional printer
Hide thumbs Also See for SCX-4623FN:
Table of Contents

Advertisement

media and tray

6.
This chapter provides information on how to load originals and print media into your machine.
This chapter includes:

Preparing originals

Loading originals

Selecting print media
Changing the tray size
Supported optional devices and features may differ according to your
model. Please check your model name.
(See "Features by Models" on page 23).
PREPARING ORIGINALS
Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or
larger than 216 x 356 mm (8.5 x 14 inches).
Do not attempt to load the following types of paper, in order to prevent
paper jam, low print quality and machine damage.
-
Carbon-paper or carbon-backed paper
-
Coated paper
-
Onion skin or thin paper
-
Wrinkled or creased paper
-
Curled or rolled paper
-
Torn paper
Remove all staples and paper clips before loading.
Make sure any glue, ink, or correction fluid on the paper is completely
dry before loading.
Do not load originals that include different sizes or weights of paper.
Do not load booklets, pamphlets, transparencies, or documents with
other unusual characteristics.
LOADING ORIGINALS
You can use the scanner glass or the automatic document feeder to load an
original for copying, scanning, and sending a fax.

On the scanner glass

Make sure that no originals are in the document feeder. If an original is
detected in the document feeder, the machine gives it priority over the
original on the scanner glass. To get the best scan quality, especially for
colored or gray-scaled images, use the scanner glass.
Loading paper in the tray
Printing on special media
Setting the paper size and type
Using the output support
1. Lift and open the scanner lid.
2. Place the original face down on the scanner glass. And align it with the
registration guide at the top left corner of the glass.
3. Close the scanner lid.
Leaving the scanner lid open while copying may affect copy
quality and toner consumption.
Dust on the scanner glass may cause black spots on the
printout. Always keep it clean (See "Cleaning the scan unit" on
page 89).
If you are copying a page from a book or magazine, lift the
scanner lid until its hinges are caught by the stopper and then
close the lid. If the book or magazine is thicker than 30 mm,
start copying with the lid open.
Be careful not to break the scanner glass. You may get hurt.
Do not put hands while closing the scanner lid. The scanner lid
may fall on your hands and get hurt.
Media and tray_ 45

Advertisement

Table of Contents
loading

Table of Contents