Mac Scanning - Samsung MultiXpress X422x Series Administrator's Manual

Mac scanning

3
Scanning from USB connected machine
1 Make sure that the machine is connected to your computer and
powered on.
Place a single document face down on the document glass, or load the
2
documents face up into the document feeder (see "Loading originals" on
page 42).
3 Start Applications and click Image Capture.
If No Image Capture device connected message appears, disconnect the
USB cable and reconnect it. If the problem continues, refer to the Image
Capture's help.
4 Select the option you want.
Scan and save your scanned image.
5
If scanning does not operate in Image Capture, update Mac OS to the latest
version.
4
Scanning from network connected machine
1 Make sure that your machine is connected to a network.
2 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 42).
3 Start Applications and click Image Capture.
4 According to OS, follow steps below.
• For 10.5
- Click Devices > Browse Devices on Menu bar.
- Make sure that Connected checkbox is checked beside your
machine in Bonjour Devices.
• For 10.6 -10.9, select your device below SHARED.
5 Set the scan options on this program.
6 Scan and save your scanned image.
• If scanning does not operate in Image Capture, update Mac OS to the
latest version.
• For more information, refer to the
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• You can scan using Samsung Scan Assistant software. Open the
Applications folder > Samsung folder > Samsung Scan
Image Capture's help.
Assistant.
5. Scan & Send(Scanning)
119