Samsung MultiXpress X422x Series Administrator's Manual page 99

Understanding the copy screen
Original type
Use this setting to improve copy quality by selecting the appropriate document
type for the current job.
• Text: Use if the original is mostly text and very few or no images.
• Text/Photo: Use if the original is a mix of text and images.
• Photo: Use if the original is mostly or exclusively images.
N-up
Reduces the size of the original images and prints 2 -16 pages onto one sheet of
paper.
When you use the N-Up feature, the ID Copy, Image Repeat, Booklet,
Book Copy, Image Shift, and Poster Copy menus are disabled.
• Off: Disable this feature.
• N-Up: Copies the specified number of pages from the original onto one
sheet of paper.
• Orientation: You can select the direction in which information is copied on
a page.
You cannot adjust the copy size using Reduce/Enlarge for the N-Up
feature.
Booklet
The machine automatically prints on one or both sides of the paper, which are
then folded to produce a booklet with all pages in the correct sequence. The
machine will also reduce and correctly adjust the position of each image to fit on
the selected paper.
• Off: Disables this feature.
• 1 Sided Originals: Copy one side of the original to one sheet of a booklet.
• 2 Sided Originals, Book: Copy each side of an original to one sheet of a
booklet.
• 2 Sided Originals, Calendar: Copy each side of an original to one page of a
booklet. The second side of each original is rotated 180 degrees so the text
will be upright in the booklet.
Book Copy
Use this feature to copy a book. If the book is too thick, lift the RADF until its
hinges are engaged by the stopper, then close the RADF. If the book or
magazine is thicker than 30 mm (1.18 inches), start copying with the RADF open.
This copy feature is available only when you place originals on the scanner
glass.
• Off: Disables this feature.
• Left Page: Prints only the left page of the book.
99
4. Copying