1. Manuals
  2. Brands
  3. STEINDORFF Manuals
  4. Microscope
  5. NYMCS-603
  6. User manual

STEINDORFF NYMCS-603 User Manual

Metallurgical microscope
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
STEINDORFF
Metallurgical Microscope
Model Number
NYMCS-603

User Manual

This manual is written for Metallurgical Microscope of NYMCS-603. For safety and for exerting
the best performance, making you familiar with the instrument entirely, it is strongly
recommended that you read this manual carefully before using the microscope.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NYMCS-603 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for STEINDORFF NYMCS-603

Summary of Contents for STEINDORFF NYMCS-603

  • Page 1: User Manual

    NYMCS-603 User Manual This manual is written for Metallurgical Microscope of NYMCS-603. For safety and for exerting the best performance, making you familiar with the instrument entirely, it is strongly recommended that you read this manual carefully before using the microscope.

  • Page 2: Table Of Contents

    ® STEINDORFF Contents NYMCS-603 User Notices …………………………………………………………………… 2 1 Components Name ………………………………………………………….. 3 2 Installation …………………………………………………………………... 4 2.1 Installing Diagram …………………………………………………………………….. 2.2 Installing steps …………………………………………………………………………. 3 Adjustment & Operation …………………………………………………..9 3.1 Adjustment System Installing Illustration ………………………………………….. 3.2 Operation ……………………………………………………………………………….

  • Page 3: User Notices

    ® STEINDORFF Use Notices NYMCS-603 I. Safety note 1. Carefully open the box, avoid the accessories, like lens, dropping to ground and being damaged. 2. Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking environment.

  • Page 4: Components Name

    ® STEINDORFF 1. Name of Components NYMCS-603...

  • Page 5: Installation

    ® STEINDORFF 2．Installation NYMCS-603 2.1 Installing Illustration The following shows the installing order of the spare parts. The number expresses the installing process.  Before the installing, make sure there is no dust and stain on the spare parts. No marks by outside force on the surface of the spare parts or glass.

  • Page 6: Installing Steps

    ® STEINDORFF 2.2 Installing Steps Installing the Objective (Fig. 2.2.1 1-2) 1. Adjust the coarse &fine focus knob, till the mechanical stage to the low limited place. 2. Screw down the objective to nosepiece from left or right side, low magnification objective first.
  • Page 7 ® STEINDORFF 2.2.3 Install the binocular viewing head (Fig. 5-6) Insert the binocular viewing head in the head of the body, turn to the right place, then fix up it by bolts. Fig. 5 Fig. 6 2.2.4 Install the eyepiece (Fig. 7-8) Insert the eyepiece in the eyepiece tube till end.
  • Page 8 ® STEINDORFF 2.2.5 Install the color filter (Fig. 9-10) Put the filter into the jack of the illumination system. ★ There is three type of color filter. The color is blue, yellow and green. 2.2.6 Connecting the Power Cord (Fig. 11-13) Fig.
  • Page 9 ® STEINDORFF 2.2.8 Installing and replacing the lamp (Fig. 14-17)  Please use the specified halogen Lamp 6V30W. Pull out the lamp-house ① as the picture show (Fig. 14) Hold to the bulb ① after you wrap it with gauze or other...

  • Page 10: Adjustment & Operation

    ® STEINDORFF 3. Adjustment & Operation NYMCS-603 3.1 Adjustment Set Diagram (Fig. 18-19) Fig. 18...
  • Page 11 ® STEINDORFF Fig. 19...

  • Page 12: Operation

    ® STEINDORFF 3.2 Operation 3.2.1 Open Lamp-House (Fig. 20) Connect the power, turn on the main switch (Fig. 15) to “-” (on). 3.2.2 Adjusting the brightness (Fig. 21) Turning brightness adjustment knob anti-clockwise, the voltage raise, and the brightness strengthen; turning it clockwise, the voltage decline, Fig.
  • Page 13 ® STEINDORFF 3.3.4 Adjusting the Diopter (Fig. 23) Observe the right ocular tube with your right eye. Turn the Coarse & Fine Focus Knob to focus the specimen. Observe the left ocular tube with your left eye. If not in focus just adjust the Diopter Ring ①...
  • Page 14 ® STEINDORFF 3.3.7 Placing Specimen (Fig. 26) Place the slide on the mechanical stage. Use the stage clips to clamp the slide gently. Turn the portrait and lateral adjustment knob of the mechanical ruler, move the specimen onto the required position.

  • Page 15: Technical Specifications

    ® STEINDORFF NYMCS-603 4．Technical Specifications 1. Main specifications Optical System Infinite Optical System Compensation Free Trinocular Head, Inclined at 30, Interpupillar distance: Viewing Head 48-75mm Eyepiece (Ocular) View field line 18mm Nosepiece Forward Quadruple Nosepiece Objective Infinite plan Achromatic: 4×, 10×, 20×(choose and buy), 40×...

  • Page 16: Troubleshooting

    ® STEINDORFF 5．Troubleshooting NYMCS-603 Some problems will happen in the using of the microscope, you could solve them according the following list. PROBLEMS REASON FOR PROBLEMS SOLUTION I. Optical Part: The poor contact exists in the lamp house and Ensure the contact pin and the lamp holder pin work well the illumination system.
  • Page 17 ® STEINDORFF II. Mechanical Part: 1. The coarse focus knob is The tension adjustment collar is Loose properly hard to run too tight 2. The image can’t stay on the focal plane in the The tension adjustment collar is Tighten properly...

Table of Contents