Table of Contents
Advertisement
Top Cowl Removal and Installation
REMOVAL
1. Release the rear latch.
2. Lift up the rear of the cowl and push it towards the front of the
engine to clear the front hook.
INSTALLATION
1. Engage the front hook and position the cowl over the engine.
2. Lock the rear latch.
Battery Inspection
The battery should be inspected at periodic intervals to ensure
proper engine starting capability.
IMPORTANT: Read the safety and maintenance instructions
which accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water, as necessary, to keep the battery full.
3. Make sure the battery is secure against movement.
4. Battery cable terminals should be clean, tight, and correctly
installed. Positive to positive and negative to negative.
5. Make sure the battery is equipped with a non‑conductive
shield to prevent accidental shorting of battery terminals.
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.
MAINTENANCE
79
31925
Advertisement
Table of Contents
