Table of Contents
Advertisement
Propeller Replacement
Rotating propellers can cause serious injury or death. Never
operate the boat out of the water with a propeller installed. Before
installing or removing a propeller, place the drive unit in neutral
and engage the lanyard stop switch to prevent the engine from
starting. Place a block of wood between the propeller blade and
the anti‑ventilation plate.
1. Remove the spark plug leads to prevent the engine from
starting.
2. Shift the outboard into neutral (N).
N
3. Straighten the cotter pin and pull it out using a pair of pliers.
4. Place a block of wood between gearcase and propeller to
prevent rotation and remove the propeller nut.
MAINTENANCE
WARNING
!
F
N
R
26838
26899
84
31971
Advertisement
Table of Contents
