Table of Contents
Advertisement
ENGINE INSTALLATION
a. Move the remote control handle from neutral into forward
and advance the handle to full speed position. Slowly return
the handle back to neutral. Place a mark ("a") on the cable
next to the end guide.
b. Move the remote control handle from neutral into reverse
and advance the handle to full speed position. Slowly return
the handle back to neutral. Place a mark ("b") on the cable
next to the end guide.
c. Make a center mark ("c"), midway between marks ("a" and
"b"). Align the end guide with this center mark when
installing cable to the engine.
2. Position the remote control handle into neutral.
3. Manually move the shift lever on the engine forward to gain
clearance for attaching the cable.
a
b
c
117
6098
Advertisement
Table of Contents
