Led Indicators - Motorola AP7131 Installation Manual

22

2.5 LED Indicators

Both AP7131 and AP7131N model Access Point have six LEDs on the top of the Access Point housing, and one
optional LED light pipe at the bottom of the unit. However, an AP7131 model Access Point does not use LED 6, as
no third radio is available. Five LEDs illuminate (on top of the housing) for dual radios models and four illuminate
for single radio models.
The Access Point utilizes two (different colored) lights below each LED. Only one light displays within a LED at any
given time. Every light within each LED is exercised during startup to allow the user to see if an LED is
non-functional. The LEDs turn on and off while rotating around in a circle. Since two LEDs feed each light pipe, the
pattern is from left to right, then right to left.
NOTE
NOTE
The LED blink rate is proportional to activity. The busiest traffic
corresponds to the fastest blink, while the slowest traffic corresponds to
slowest blink.
Depending on how the 5 GHz and 2.4 GHz radios are configured, the LEDs
will blink at different intervals between amber and yellow (5 GHz radio)
and emerald and yellow (2.4 GHz radio).
AP-7131 Access Point