Ir In / Ir Out Terminal Connection - Panasonic TH-55SQ1W Operating Instructions Manual

Command
Command Parameter
PON None
POF None
AVL
＊＊＊
AMT
None
HM1
HM2
DP1
DL1
DV1
IMS
SL1
PC1
NW1
UD1
MV1
None
FULL
NORM
NATV
DAM
HFIT
VFIT
ZOOM
ZOM2
Note
● If multiple commands are transmitted, be sure to wait
for the response for the first command to come from
this unit before sending the next command.
● If an incorrect command is sent by mistake, this unit
will send an "ER401" command back to the computer.
● When sending a command which does not require
parameter, a colon (:) is not needed.
●
Consult your local Panasonic dealer for detail
instructions on command usage.
For more details, visit the following web site.
https://panasonic.net/cns/prodisplays/
● For 98 and 86 inch models, [Screen Transfer] is
displayed only when the main software version is
4.0000 or later.
Control details
Power ON
Power OFF
Volume 000 ‒ 100
0 Audio MUTE OFF
1 Audio MUTE ON
Input select (toggle)
HDMI 1 input
(HDMI1)
HDMI 2 input
(HDMI2)
DisplayPort IN input
(DisplayPort)
DIGITAL LINK input
(DIGITAL LINK)
DVI-D IN input
(DVI-D)
SLOT input (SLOT)
PC IN input (PC)
Screen Transfer
input
(Screen Transfer)
USB input (USB)
"Memory viewer"
input
(MEMORY VIEWER)
Screen mode select
(toggle)
Full
Normal
Native
H fit
V fit
Zoom1
Zoom2

IR IN / IR OUT terminal connection

Connect the stereo mini plug (M3) cable from the IR
OUT terminal of the first display to the IR IN terminal of
the second display.
The infrared signal of the first display is sent to the
second display.
In this case, the IR (infrared ray reception on the remote
control sensor) on the second display does not operate.
Repeating the above connections enables the daisy
chain connection.
Note
●
Connection cables are not supplied with this unit.
●
Daisy chain connection is possible only between the
displays of the same series.
Stereo mini plug (M3) cable (commercially available)
First display
Second display
Third display
29
English