Video Terminal Connection - Panasonic th-32ef1e Operating Instructions Manual

●
The computer shown in the illustration is for example
purposes only.
●
Additional computer, cables and conversion adapter
shown are not supplied with this set.
●
Do not set the horizontal and vertical scanning
frequencies for PC signals which are above or below
the specified frequency range.
●
Component Input is possible with the pin 1, 2, 3 of the
Mini D-sub 15P Connector.
●
Change the [Component/RGB-in select] setting in
the [Signal] menu to [Component] (when Component
signal connection) or [RGB] (when RGB signal
connection). (see page 40)
Pin assignments and signal names for PC Input
Terminal (Mini D-sub 15P)
5 4
10
15 14 13 12 11
Pin No.
R (P /C
R
G (Y)
B (P /C
B
NC (not connected)
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
+5 V DC
GND (Ground)
NC (not connected)
SDA
HD/SYNC
VD
SCL
3 2 1
9 8 7 6
Signal Name
)
R
)
B

VIDEO terminal connection

Note
●
Video equipment, connection cables and conversion
plugs are not supplied with this unit.
4-pole mini plug conversion cable (commercially
available)
Audio video pin cable
Video Cassette Recorder
DVD Player
Wiring specifications for 4-pole mini plug
Note
●
Use a 4-pole mini plug (M3) with the following wiring
specifications for the VIDEO terminal of this unit. If
the wiring of a plug is different, audio and video are
not correctly input.
Audio L (White)
Video (Yellow)
GND (Ground)
Audio R (Red)
Yellow
White
Red
1
2
3
4
English
17