Pc Interface; Writing And Editing A Text Message - Siemens Gigaset SL56 Owner's Manual

Notes on user guide
Time:
Enter hours/minutes in 4-digit format.
¤
Press the s key.
The fourth line is marked with [ ] to show
it is active.
¤
Enter the date using the digit keys.
¤
Save changes.
¤
Press the display key
¤
Then press and hold the a key.
The handset switches to idle status.

PC Interface

You can connect the handset to your com-
puter using a data cable (page 32). Your
handset can communicate with a compu-
ter via a program (free download at
www.siemens.com/gigasetSL560). You
can access your handset's directory and
download sounds (.mid) and pictures
(.bmp) for the screensaver from your com-
puter to the handset.
During the transfer of data between hand-
set and PC, you will see
the display. During this time, it is not pos-
sible to use the keypad and incoming calls
will be ignored.
Note:
If the handset is in Bluetooth mode (page 23),
any connection via the data cable that is
already connected will be interrupted. Blue-
tooth must be deactivated in order for you to
be able to use a connected data cable.
30
.
§Save§
on
Data Transfer
Writing and editing a text
message
The following rules apply when writing a
text message:
Control the cursor with u v t
u
s.
u
Characters are added to the left of the
cursor.
Press the star key * to show the
u
table of special characters.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
You can call up the table of special charac-
ters when writing an SMS (depending on
base station) using the
the required character and insert it with
.
§Insert§
Writing an SMS/name (without
predictive text)
When you press and hold a key, the char-
acters of that key appear in the display and
are highlighted one after the other. When
you release the key the highlighted char-
acter is inserted into the input field.
Press the hash key # briefly to switch
from "Abc" mode to "123" and from "123"
to "abc" and from "abc" to "Abc" (upper
case: 1st letter upper case, all others
lower case). Press the hash key #
before entering the letter.
You can see in the display whether upper
case, lower case or digits is selected.
Writing an SMS (with predictive text)
Your base station must support SMS for
this.
EATONI predictive text helps you when
you are writing text messages.
*
key. Select