Writing And Editing Text - Siemens S790 User Manual

Appendix
Base power consumption
In standby mode:
Gigaset S790: approx. 1,1 watt
Gigaset S795: approx. 1,2 watt
During the conversation:
Gigaset S790: approx. 1,0 watt
Gigaset S795: approx. 1,1 watt
General specifications
DECT standard
GAP standard
No. of channels
Radio frequency range 1880–1900 MHz
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Base power supply
Environmental condi-
tions in operation
Dialling mode
Pin connections on the telephone jack
3
2
1
76
Is supported
Is supported
60 duplex channels
Time multiplex,
10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power
per channel
Up to 300 m outdoors,
up to 50 m indoors
230 V ~/50 Hz
+5°C to +45°C, 20% to
75% relative humidity
DTMF (tone dialling)/
PD (pulse dialling)
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused

Writing and editing text

The following rules apply when writing
text:
Each key between Q and O is
u
assigned several letters and characters.
Control the cursor with u v t s.
u
Press and hold u or v to move the
cursor word by word.
u
Characters are inserted at the cursor
position.
Press the star key * to display the
u
table of special characters. Select the
required character and press the dis-
play key to insert the character at
§Insert§
the cursor position.
Press and hold Q to O to enter
u
digits.
u
Press display key
acter to the left of the cursor. Press and
hold to delete the word to the left of
the cursor.
u
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to
change the text input mode.
123 Writing digits
Abc Upper case *
abc Lower case
* First letter in capitals, all others in lower case
The active mode is indicated at the bottom
right of the screen.
Ñ
to delete the char-