Direct Dialing And Sos Keys - Siemens Gigaset E365 Manual

Using the directory, Direct Dialing keys, and lists
Dialing with the directory
¢
s q (Select entry; page 21)
Managing directory entries
You have selected an entry (page 21).
Editing entries
¢ ¢
Edit Entry
§Menu§
number, if required)
(Change name, if required)
Using other functions
The following functions can be selected
¢
q:
with
§Menu§
Use Number
Edit or add to a stored number. Then
dial or use other functions with
Show Number
Show number.
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another handset
(page 22).
Delete List
Delete all directory entries.
Send List
Send the complete list to another hand-
set (page 22).
Sending the directory to another
handset
Requirements:
u
The sending and receiving handsets
must both be registered to the same
base station.
u
The other handset and base station can
send and receive directory entries.
¢
s q (Select entry; page 21)
¢ ¢
Send Entry
§Menu§
¢ ¢
~ (Enter the internal
§OK§
number of the receiving handset)
¢
§OK§
22
¢
c
¢
~ (Change
§OK§
¢ ¢
~
§OK§
¢
§OK§
.
§Menu§
/ Send List
A successful transfer is confirmed by a
message and confirmation tone on the
receiving handset.
Adding a displayed number to the
directory
You can copy any numbers to the directory
that appear in a list, for example, the calls
list or the last number redial list.
If you arranged Caller ID/Name with your
network provider, the first 16 characters
of the transferred name are also copied to
the Name line.
A number is displayed.
¢
Copy to Directory
§Menu§
¤
Complete the entry (page 21).
The message playback is interrupted dur-
ing the number transfer from the answer-
ing machine list.

Direct Dialing and SOS keys

You can store particularly important
phone numbers, for example, emergency
numbers, in the four Direct Dialing keys.
You can program the Direct Dialing key I
for SOS calls.
Dial the stored direct dialing number
u
On the base station by pressing the
corresponding Direct Dialing key,
u
On the handset by pressing the corre-
sponding Direct Dialing key and the
Talk key c.
To initiate an SOS call, proceed as
described in the section "SOS procedure"
(page 9).
Refer to the font table (page 20) for infor-
mation on how to enter the text correctly.
The programmed assignment of the Direct
Dialing keys and the SOS key applies to
both the handsets and the base station.
Note:
The SOS key works even if the keypad lock is
switched on.
¢
§OK§