Table of Contents
Advertisement
First steps
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the direct dialing keys.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage the notches.
You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤
Remove the belt clip, if necessary.
¤
Reach into the housing cavity and pull
the battery cover upwards.
12
Placing the handset into the base
station and registering
¤
To start the automatic registration of
your handset, please place the handset
in the base with the display facing
outwards.
¤
The handset registers automatically.
Please do NOT remove your handset
from the base station during the regis-
tration procedure.
The registration can take up to 5 minutes.
While registration is in progress the screen
displays
Registering
. The handset will be
assigned the lowest unassigned internal
number (1–4). If several handsets are reg-
istered to the base, the internal number is
shown on the screen after registration (for
example, 2). This means that the handset
has been assigned the internal number 2.
U
2
Redial
§§Menu §
§
Advertisement
Table of Contents
