Setting Surface Controls
OPERATING THE INDUCTION COOKING ZONES
The cooktop has two induction Cooking Zones designed for cookware of various
sizes. Be sure to place cookware that meets the minimum and maximum pan
size requirements (Fig. 2, page 14) for the Cooking Zone desired and is best for
the amount of food being prepared. Place the cookware with the prepared food
on the Cooking Zone BEFORE setting any of the Cooktop controls.
To Turn ON one or more of the Cooking Zones:
1. Place the prepared food using the correct type and size cookware on the
2. Touch and hold the
Indicator light located above the
touched within 20 seconds the request to Power ON the cooktop will clear.
3. To start one or more Cooking Zones lightly touch the
Zones needed. A beep will sound and the chosen Cooking Zone power level digital
display will show
no other key pad is touched within 10 seconds the request to Power ON the Cooktop
Zone will clear.
4. Set the desired power level for the Cooking Zone by touching either the
key pad. If the
maximum power level (the Cooking Zone LED will display
once). If the
Cooking Zone LED will display
NOTE: Touch once, or repeatedly touch the
through power levels at any time during the cooking process (To scroll through the
power levels quickly touch and hold the
desired is reached). Once the Cooking Zone power level has been set the food will
begin to heat at that level until the power level is manually changed. For more
information about the available Cooktop Zones power levels available see "Power
Level Settings" section below.
P (Power Boost)
MEDIUM HIGH (8-9)
MEDIUM LOW (2 - 4)
desired Cooking Zone. Be sure to center the cookware on Cooking Zone
completely covering the minimum ring marked on the Zone surface. PLEASE
NOTE: If the cookware requirements for the Cooking Zone (See Fig. 1, page
15) are not met the sensors will detect a problem and display the letter
the affected Cooking Zone LED. Any problems must be corrected before
key pad for a few seconds or until a beep sounds. The Power
0 0 0 0 0
indicating no power level for the Zone has been set yet. NOTE: If
key pad is touched the Cooking Zone will start at a "Power Boost"
key pad is touched once the Cooking Zone will start at 1 (the
1 1 1 1 1
and the control will beep once).
Recommended Surface Settings Chart
Type of Cooking
Start most foods; bring water to a boil and pan broiling.
Continue a rapid boil; frying, deep fat frying.
Maintain a slow boil; thicken sauces and gravies; steaming
Keep foods cooking; poaching and stewing.
Keep warm, melting and simmering.
key pad will turn ON. NOTE: If no other key pad is
key pad for the Cooking
P P P P P
and the control will beep
key pads to adjust or scroll
key pads until the power level
F F F F F