Video - Yamaha RX-V781 Owner's Manual

⬛
Object Decode Mode
Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X
contents.
Settings
Disables playback of object-based audio signals. Those signals will be played in
Disable
normal 5.1-/7.1-channel audio.
Enable Enables playback of object-based audio signals.
X
Regardless of this setting, object-based audio signals are played in normal 5.1-/7.1-channel audio if any of
CINEMA DSP programs is selected.

Video

Configures the video output settings.
⬛
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Direct Disables the video signal processing.
Enables the video signal processing.
Processing
Select a resolution and an aspect ratio in "Resolution" and "Aspect".
X
• When "Video Mode" is set to "Direct", the unit transmits video signals with the least circuitry in order to reduce
video output delay.
• When "Video Mode" is set to "Processing" and the resolution is being converted, short messages are not
displayed on the TV screen.
Resolution
Selects a resolution to output HDMI video signals when "Video Mode" is set to "Processing".
Settings
Through Does not convert the resolution.
Auto Selects a resolution automatically in accordance with TV resolution.
Output video signals with a selected resolution.
480p/576p, 720p,
1080i, 1080p, 4K
(Only the resolutions supported by your TV are selectable.)
X
If you need to select a resolution that is not supported by your TV, set "MON.CHK" (p.130) in the "ADVANCED
SETUP" menu to "SKIP" and try again. (Note that the output video may not be displayed on your TV normally.)
116
En