Mac Address Filter; Network Name - Yamaha RX-V781 Owner's Manual

⬛

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
Off Disables the MAC address filter.
Enables the MAC address filter. In "MAC Address 1-10", specify the MAC addresses
On
of the network devices that will be permitted access to the unit.
X
AirPlay (p.86) and DMC (p.103) operations are not subject to the MAC address filter.
MAC Address 1-10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to
the unit when "Filter" is set to "On".
⬛
Setup procedure
1
Use the cursor keys (q/w) to select "MAC Address 1-5" or "MAC Address 6-10" and press
ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a
value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select "OK" and press ENTER.
6
To exit from the menu, press ON SCREEN.
⬛

Network Name

Edits the network name (the unit's name on the network) displayed on other network devices.
⬛
Setup procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
120
En