Yamaha RX-V781 Owner's Manual page 113

Front Presence
Selects a front presence layout when front presence speakers are used. This setting facilitates
the optimization of the sound field effect.
Settings
Select this option when front presence speakers are installed on the front side
Front Height
wall.
Overhead Select this option when front presence speakers are installed to the ceiling.
Select this option when using the Dolby Enabled speakers as the front presence
Dolby Enabled SP
speakers.
X
• This setting is not available when "Configuration (Front Presence)" is set to "None".
• To play Dolby Atmos contents using the front presence speakers, see "Presence speaker layout" (p.22).
⬛
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance from
"Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Subwoofer
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
⬛
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Subwoofer
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
⬛
Parametric EQ
Adjusts the tone with an equalizer.
Settings
Select this option when you want to adjust the equalizer manually.
Manual
For details, see "Manual equalizer adjustment".
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
Adjusts individual speakers to achieve the same characteristics as the front
YPAO:Front
speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through Does not use the equalizer.
X
"YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the measurement results of "Auto
Setup" have already been saved (p.45). Press ENTER again to view the measurement results.
⬛
Manual equalizer adjustment
1
Set "Parametric EQ" to "Manual" and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
X
• To restore the default settings for all speakers, select "PEQ Data Clear" and then "OK".
• To copy the parametric equalizer values acquired with "Auto Setup" (p.45) to the "Manual" fields for fine
adjustment, select "PEQ Data Copy" and then an equalizer type.
4
Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for
subwoofer) and the cursor keys (q/w) to adjust the gain.
Setting range
Gain: -20.0 dB to +6.0 dB
113
En