Configuring The Scene Function (Scene Menu) - Yamaha RX-V781 Owner's Manual

⬛
Decoder Mode
Sets the format of digital audio playback to "DTS".
For example, if the unit does not detect DTS audio and outputs noise, set "Decoder Mode" to
"DTS".
Input sources
HDMI 1-5, V-AUX, AV 1-4
Settings
Auto Automatically selects an audio format to match the input audio signal.
DTS Selects DTS only. (Other audio signals are not reproduced.)
⬛
Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Input sources
AirPlay
Settings
Off Disables volume controls from iTunes/iPod.
Enables volume controls from iTunes/iPod within the limited range
Limited
(-80 dB to -20 dB and mute).
Enables volume controls from iTunes/iPod in the full range
Full
(-80 dB to +16.5 dB and mute).
⬛
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.
Input source
SERVER
Settings
Disable Does not allow DMCs to control playback.
Enable Allows DMCs to control playback.
X
A Digital Media Controller (DMC) is a device that can control other network devices through the network. When
this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on
the same network.

Configuring the SCENE function (Scene menu)

You can change the settings of the SCENE function (p.63) using the TV screen.
1
Press ON SCREEN.
2
Use the cursor keys to select "Scene" and press ENTER.
3
Use the cursor keys (e/r) to select a scene to be configured and press the
cursor key (q).
X
You can still switch the scene by using cursor keys (e/r) after Step 3.
103
En