Yamaha RX-V781 Owner's Manual page 37

Y
The following operation is available only when your TV is connected to the unit via HDMI.
1
After connecting external devices (such as a TV and playback devices) and
power cable of the unit, turn on the unit.
2
Press AV 2 to select "AV 2" (video input jack to be used) as the input source.
AV 2
ON SCREEN
Cursor keys
ENTER
3
Press ON SCREEN.
4
Use the Cursor keys to select "Input" and press ENTER.
5
Use the Cursor keys (e/r) to select "AV2" (video input jack to be used) and
press the Cursor key (q).
6
Use the Cursor keys to select "Audio In" and press ENTER.
7
Use the Cursor keys to select "AV5" (audio input jack to be used).
8
Press ON SCREEN.
This completes the necessary settings.
If you select "AV 2" as the input source by pressing AV 2, the video/audio played back on the
video device will be output from the unit.
37
En