Multi Zone - Yamaha RX-V781 Owner's Manual

Multi Zone

Configures the multi zone settings.
⬛
Main Zone Set
Configures the main zone setting.
Zone Rename
Changes the zone name (for main zone) displayed on the TV screen.
⬛
Setup procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
⬛
Zone2 Set
Configures the Zone2 settings.
Volume
Enables/disables volume adjustments for Zone2 output.
If you have connected an external amplifier with volume control to the unit, disable volume
adjustments for Zone2.
Settings
Fixed Disables volume adjustments for Zone2 output.
Variable Enables volume adjustments for Zone2 output.
X
This setting is not available when "Power Amp Assign" (p.111) is set to "7.1 +1Zone" or "5.1.2 +1Zone".
Max Volume
Sets the Zone2 limit value of the volumes.
Setting range
-30.0 dB to +10.0 dB (5.0 dB increments)
X
This setting is available only when "Power Amp Assign" (p.111) is set to "7.1 +1Zone" or "5.1.2 +1Zone".
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
Settings
Off Sets the level at the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80 dB to +10.0 dB, 0.5 dB increments).
On
(This setting works only when the initial volume is set lower than "Max Volume".)
X
This setting is available only when "Power Amp Assign" (p.111) is set to "7.1 +1Zone" or "5.1.2 +1Zone".
Zone Rename
Changes the zone name (for Zone2) displayed on the TV screen.
You can change the zone name in the same manner as "Zone Rename" in "Main Zone Set"
(p.122).
122
En