Trigger Output; Target Zone; Trigger Mode; Memory Guard - Yamaha RX-V781 Owner's Manual

⬛

Trigger Output

Sets the TRIGGER OUT jack to function in sync with the power status of each zone or input
switching.

Trigger Mode

Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions in sync with the power status of the zone
Power
specified with "Target Zone."
The TRIGGER OUT jack functions in sync with the input switching in the zone
specified with "Target Zone."
Source
An electronic signal is transmitted according to the setting made in "Source."
Select this to manually switch the output level for electronic signal transmission
Manual
with "Manual."
Source
Specifies the output level of the electronic signal transmitted with each input, switching when
"Trigger Mode" is set to "Source".
Choices
HDMI 1-5, AV 1-6, V-AUX, AUDIO 1-2, TUNER, PHONO, (network sources), Bluetooth, USB
Settings
Stops the electronic signal transmission when you switch to the input source
Low
specified in this option.
Transmits the electronic signal when you switch to the input source specified in
High
this option.
Manual
Switches the output level for electronic signal transmission manually when "Trigger Mode" is
set to "Manual". This setting can also be used to confirm proper function of the external device
connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High Transmits the electronic signal.

Target Zone

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with the power status of the main zone.
Main
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with the input switching in the main zone.
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with the power status of Zone2.
Zone2
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with the input switching in Zone2.
When "Trigger Mode" is set to "Power," electronic signal transmission is
synchronized with the power status of the main zone or Zone2.
All
When "Trigger Mode" is set to "Source," electronic signal transmission is
synchronized with the input switching in the main zone or Zone2.
⬛

Memory Guard

Prevents accidental changes to the settings.
Settings
Off Does not protect the settings.
On Protects the settings until "Off" is selected.
X
When "Memory Guard" is set to "On", the lock icon (o) is displayed on the menu screen.
124
En
Icon