Yamaha RX-V781 Owner's Manual page 102

⬛
Rename/Icon Select
Changes the input source name and icon displayed on the front display or TV screen.
Input sources
HDMI 1-5, V-AUX, AV 1-6, AUDIO 1-2, USB, PHONO
⬛
Setup procedure
1
Use the cursor keys (e/r) to select "Auto" or "Manual" and press the cursor key (w).
If you select "Auto", the unit creates a name automatically according to the connected device.
Proceed to Step 3.
X
This step is available only when "HDMI1-5", "V-AUX" or "AV 1-4" is selected.
2
Use the cursor keys (e/r) to select a template and press the cursor key (w).
3
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
4
Press ENTER to enter the name edit screen.
5
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
6
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
7
To exit from the menu, press ON SCREEN.
⬛
Audio In
Combines the video jack of the selected input source with an audio jack of others. For example,
use this function in the following cases.
• Connecting a playback device that supports HDMI video output, but not HDMI audio output
• Connecting a playback device that has component video jacks and analog stereo jacks (such
as game consoles)
Input sources
HDMI 1-5, AV 1-2
(To input audio through a digital optical jack)
Select "AV1" or "AV4" and connect the device to the unit's corresponding audio jacks with a
digital optical cable.
(To input audio through a digital coaxial jack)
Select "AV2" or "AV3" and connect the device to the unit's corresponding audio jacks with a
digital coaxial cable.
(To input audio through analog audio jacks)
Select "AV5", "AV6", "AUDIO1", or "AUDIO2", and connect the device to the unit's
corresponding audio jacks with a stereo pin cable.
102
En