Connecting The Power Cable - Yamaha RX-V781 Owner's Manual

6

Connecting the power cable

Before connecting the power cable (Taiwan, Brazil and General models only)
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are
AC 110–120/220–240 V, 50/60 Hz.
Y
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet.
Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard.
The unit (rear)
EXTRA SP1
F.PRESENCE/ZONE2
EXTRA SP2
NT SURROUND BACK
SINGLE
ZONE2/BI-AMP
After all the connections are complete, plug in the power cable.
The unit (rear)
NETWORK
(NET)
EXTRA SP1
F.PRESENCE/ZONE2
SPEAKERS
WIRING CABLAGE CLASSE 2
EXTRA SP2
CENTER FRONT SURROUND BACK
SINGLE
ZONE2/BI-AMP
VOLTAGE SELECTOR
VOLTAGE SELECTOR
220V-
240V
110V-
120V
To an AC wall outlet
42
En