Changing The Presser Foot - JUKI HZL-70 series Instruction Manual

Changing the presser
foot
e
e
Attention:
Turn power switch to off ("O")
when carrying out any of the
c
above operations!
b
d
f
Removing the presser foot (1)
Raise the presser foot.
Press the black lever (e) and
the foot will disengages.
Attaching the presser foot (2)
Lower the presser foot holder
a (b) until the cut-out (c) is
directly above the pin (d).
g
Press the black lever (e).
Lower the presser foot holder
(b) and the presser foot (f) will
b
engage automatically.
Removing and Attaching the
presser foot holder (3)
Raise the presser foot bar (a).
Remove and Attach the presser
foot holder (b) as illustrated.
Attaching the edge/quilting
guide (4)
Attach the edge/quilting guide
(g) in the slot as illustrated.
Adjust according to need for
hems, pleats, etc.
21