Mode Selection Button (6); Stitch Length Adjustment Button (7) - JUKI HZL-70 series Instruction Manual

Mode selection button (6)

The LED light will be set at
pattern mode "
machine is turned on. The light
will run by the sequence of
pattern, stitch width, and stitch
length mode.
Stitch length adjustment
button (7)
When you select a stitch the
machine will automatically set
the recommended stitch length.
If the pre-set stitch length need
adjusting once the pattern is
selected, push mode button
"
length position.
To shorten the stitch length,
press the "
longer stitch length, press the
"
can be adjusted between "0.0-
4.5". Certain stitches have a
limited length.
When the setting is at the auto
position, the number display will
blink 3 times.
When MODE is set on pattern,
press stitch length adjustment
buttons "
place 0~8.
26
" when the
Utility and decorative
pattern mode:
There are 80 patterns for
selection 01~80, stitch
selection using the stitch
width and length
adjustment buttons.
Stitch width mode
Adjust the width of the
stitch using the stitch width
adjustment buttons.
Stitch length mode
Adjust the length of the
stitch using the stitch
length adjustment buttons.
" to move to the stitch
" button. For a
" button. The stitch length
" or " " for tens