Twin Needle - JUKI HZL-70 series Instruction Manual

2.0~5.0
T

Twin needle

* The twin needle is optional. It
Insert the twin needle.
When using twin needles, use the
standard presser foot
regardless of what kind of sewing
foot will be carried out.
Use only twin needle assemblies
with max. 2mm needle distance.
Follow the instructions for single-
needle threading using the
horizontal spool pin. Thread
through the left needle.
Set the auxiliary spool pin
(included with the accessories)
into the hole on the top of the
machine. Thread through
remaining points, making certain
to omit the thread guide above
the needle and pass thread
through the right needle.
Thread each needle separately.
Make sure that the two threads
used to thread the twin needle
are of the same weight. You can
use one or two colors.
Before sewing adjust the stitch
width, Turn the handwheel to
check the needle clearance, so
that needle does not hit the
needle plate.
When sewing with twin needle,
always proceed slowly, and make
sure to maintain a low speed to
insure quality stitching.
Select a stitch pattern and start to
sewing.
Except the Patterns 16-22 , the
other patterns can be used.
When sewing with twin needle,
always proceed slowly, and make
sure to maintain a low speed to
insure quality stitching.
56
is not include with the
accessories.
Attention:
(T)
Note:
Note: