Muratec MFX-2500 Operating Instructions Manual page 44

Printouts have irregularities
ABCDE
• The paper you're using may have absorbed moisture, per-
haps due either to high humidity or water having been
ABCDE
spilled on the paper supply. Toner will not adhere well to
ABCDE
wet paper.
Replace the paper with dry paper and try printing again.
ABCDE
ABCDE
Printouts have white and/or black lines
ABCDE
• The toner cartridge or drum cartridge may be defective.
Remove the cartridges and check them for damage.
ABCDE
If the problem persists, replace either or both of the car-
ABCDE
tridges as indicated.
• The LED print head may be dirty.
ABCDE
Using the cleaning paper, gently clean the LED print head.
ABCDE
• The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorised
Muratec dealer.
Printouts have toner smudges
ABCDE
• The toner may be unevenly distributed inside the toner
cartridge.
ABCDE
Remove the toner cartridge and shake it a few times to
ABCDE
redistribute the toner inside. If the problem persists, replace
the cartridge.
ABCDE
• The toner cartridge or drum cartridge may be defective.
ABCDE
Remove the cartridges and check them for damage. If the
problem persists, replace either or both of the cartridges as
indicated.
• If you find smudges on the back of the printouts, the trans-
port roller may be dirty.
Your machine normally cleans the transport roller automat-
ically. If other solutions fail, please contact your authorised
Muratec dealer.
Printouts have white spots
ABCDE
• The charger may be dirty.
Your machine normally cleans the charger automatically.
ABCDE
If other solutions fail, please contact your authorised
ABCDE
Muratec dealer.
ABCDE
ABCDE
Just in case ...
2.7