Muratec MFX-2500 Operating Instructions Manual page 28

8
The now shows the type of dialling for the
LCD
machine.
9
Press [Enter] to save the setting and continue.
10
The now asks you to enter the name you
LCD
want to appear at the top of faxes you send. The
name may be up to 22 characters in length.
Select TTI 1, 2 or 3 using the cursor key. Then
press [Enter].
11
Use the one-touch keys to enter letters and
other non-numeric characters. Regarding entering characters, see page 1.14.
Note: If you make a mistake, press [Clear] to erase to the left.
To change just one character in the name, move the cursor by cursor
key. Press [Clear] to erase the character. Then re-enter the character
correctly.
12
Press [Enter] to save the setting.
If you do want to set or change another TTI, go back to step 14.
If you do not want to set or change any other TTI, press [Exit].
13
The now asks you to set the usual TTI.
LCD
Select the TTI you want to appear usually on
faxes you send using the cursor key.
14
Press [Enter] to save the setting and continue.
15
The now asks you to set the reception
LCD
mode.
16
Select desired reception mode using the cursor
key. (This setting can always be changed. We'll
discuss reception modes further on pages 1.12-
1.13 in "Fax Reference".)
17
Press [Enter] to save the setting. Your machine will return to standby mode.
EasyStart is complete
!
Getting started
1.17