Changing The Paper Size - Muratec MFX-2500 Operating Instructions Manual

Loading the large capacity cassette (Option)
1
Pull the cassette toward you.
2
Push down the bottom plate inside the cassette so it clicks and the plate and
the bottom of the cassette are even.
3
Insert the paper into the cassette
along the right side with face up.
Note: Make sure the stack of paper
isn't higher than the limit
mark.
4
Insert the paper into the cassette
along the left side with face up.
Note: Make sure the stack of paper
isn't higher than the limit
mark.
5
Close the cassette.

Changing the paper size

You should tell the paper size to the machine, when you change the paper size. Set
the paper size after loading new papers in the cassette.
Note: When you want to change the paper size of the 2nd, 3rd, 4th or 5th paper
cassette, please contact your authorised Muratec dealer.
Changing the paper size of the multi purpose cassette
You can change the paper size of the multi purpose cassette only by moving the
guides in the cassette (See page 1.8).
To set the paper size:
1
When you put papers in the cassette, the
shows:
When using the standard paper size:
(1) Select the paper size using the cursor key.
(2) Press [Enter].
When using the non standard paper size:
(1) Press [Other].
(2) Select the paper size using the cursor key.
(3) Press [Enter].
Note: If you want to go back to the standard
paper select display, press [Standard].
Getting started
LCD
A4
A4
A4
A4
1.9