Siemens EH675TK11E Repair Instruction page 95

5.16.2 Radiant heaters of mixed devices
The h/H stay lit while they are above certain values of times,
depending on the power selected.
The time counter is found in the
corresponding residual heat indication value to the touch Control .
To provide an example, a graph is shown here, valid only for
maximum powers.
If, for example, we switch on any burner at maximum level, in
approximately 8 seconds, the small letter appears.
When it rises above 128ºC = 2 MINUTES (straight pink line) the
capital H appears
300
250
200
150
100
50
0
0 10
Tª ºC - axis of the Y
Time in minutes – axis of the X
206_58300000141095_ara_en_k.doc – 04.10.a
ELIN, which transfers the
timer.CR
Indicación H
20 30 40
On average, it takes about 11 minutes to reach 250 ºC.
5.16.3 False indication of residual heat
In the factory, some device operation tests are carried out and at
times they forget to return to the factory values.
Then, when the device is connected, the small "h" appears in the
touch Control without having switched on any zone. .
The small "h" remains static for 37 minutes until disappearing and
then the operation returns to normal.
It can also be deleted entering the technical service programme and
accessing step 2. See technical service programme and how to
access according to the corresponding model.
Seite 95 von 113