Checking The Replacement Part Is Correct - Siemens EH675TK11E Repair Instruction

5.14

Checking the replacement part is correct

5.14.1 Problem
The replacement part does not coincide with the original
5.14.2 Cause
 The supplier has sent the wrong one.
 The warehouse stock has got mixed up.
 The module software is badly saved.
5.14.3 Solution
Inform central office for them to manage the incident.
If the replacement part is an electronic item or module, the supplier
code will be located on it. Check to see if this code corresponds to the
code on the original part and if not, include this information in the
report.
 The label is located on the reverse side of TouchControl units.
206_58300000141095_ara_en_k.doc – 04.10.a
 The label is located on the front side of ELIN units.
See table of supplier codes for replacement parts according to
model.
The left 1 ELIN is the one located on support ELIN-2.
The left 2 ELIN is the one located on support ELIN-1.
Seite 87 von 113